PAINT NELSON Hobby Paint Made in the USA

May 29, 2009

We have reduced the number of inventory items for our paint products. The current  economic times requires that our inventory items turn over faster. We cannot afford to have special colors in stock that may not be sold in a timely manner. Therefore, in general terms, this is what we have done.

1. Our stock paints will only be available in half pint bottles (8 ounces) and a new size of quart cans (32 ounces) is now available. There is a significant saving if quarts are ordered. At the moment orders for pints will be sent as two half pints. Our shopping cart will be changed to reflect this change soon as possible.

Civilian Colors

2. With a few exceptions our stock civilian colors will be the standard Monokote and Ultracoat film colors. As in the past, we do not have metallic, transparent, and pearl colors.

Military Colors

3. Our standard military colors are approximately 10 of the common colors from each of the following countries, USA, Germany, Great Britain, and Japan. Only WW II colors and later are available. Military colors are available in Gloss or Flat. There is a premium price for the flat colors.

WW I Colors

4. WW I colors with a few exceptions (PC10 is one example) are not available. Customers must choose from a Federal Standard (FS) color and modify it as necessary. It is very difficult to come up with the correct colors because there is no accurate way of determining these colors. If aircraft parts were still intact after almost a hundred years, the colors would have changed anyway. Also the paints used then were effected by ultraviolet rays and changed color in a few weeks.

Federal Standard Colors (FS)

5. We will custom make USA Federal Standard colors (FS) that are not included in our USA military colors. Only pint or quart quantities are available. There is a premium price for this group of colors.

Industrial Colors (ICS)

6. We will custom make all custom colors shown in our ICS commercial color chart. Only pint or quart quantities are available. There is a premium price for this group of colors.

Our NELSON Hobby Paint™ is made for us by System Three Resins®, Inc. in Washington. System Three is the first company to manufacture full-scale aircraft quality polyurethane paints and a two part epoxy primer that both can be thinned or reduced with water. Their products are used extensively in the Industrial, Aerospace, Marine, and Automotive industries for several years. The same quality paint and primer are exclusively offered to the hobbyist by NELSON Hobby Specialties The NELSON Hobby paint and primer are perhaps the safest painting products available for general purpose use by the hobbyist. Excellent results are obtained, even in a home workshop environment.

Unlike typical epoxy paints, NELSON Hobby paints do not turn to a yellowish color due to sun light. Fuel proof characteristics are excellent. The paint can easily handle gasoline and nitro glow fuels with over 50% nitro. It can be applied over polyester fabrics without the need for initial coats of clear dope or special fabric primer.

We have been marketing this paint for over 10 years. Our customer base grows every year. R/C Scale Championship results have included first place wins in both the expert and team classes at the US Scale Masters Championships. Many of the AMA National Scale and Top Gun competitors have also used our paint. But the bulk of our users are mostly sport modelers who like the convenience of using a paint that thins with water and has no smell and very importantly, safe to use indoors.

NELSON Hobby Paint™ does not have any noticeable smell, thins and cleans up with water, dries in 10 minutes, fuel proof, use a foam rubber brush, and is reasonable in price. Over 170 standard colors, including film and military, in 1/2 and 1 pint containers.

This paint cleans up and is thinned with normal drinking water. The same organic resins used in solvent-based paints are modified to make them dispersible in water. A small amount of water-soluble co solvent is present to aid in film formation and to speed drying, but a pint of this paint contains 75% less solvent than a pint of solvent based paint. Coverage ability is excellent, more so than most paints. The paint can be used right out of the bottle, however up 15% or more water should be used to allow for spraying and better brushing applications.

NELSON Hobby paint products are environmentally safe. This water reducible paint and epoxy primer is nonflammable, have hardly any odor, minimal in toxicity, and a VOC level (Volatile Organic Compounds) less than 125 grams/liter. Elimination of toxic solvents and un reacted isocyanates means the nonprofessional can apply these paints safely. These paints can also be applied safely indoors. These coatings also comply with the strictest VOC emissions standards that are in force today and for standards being proposed in the future.

Water reducible coatings can lower paint costs, since there is no thinner to purchase. Water is the thinner and you can use as much “thinner” you want for clean up. Also these coatings are nonflammable and can be shipped anywhere, anytime, by any method at lowest rates without any expensive hazard fees.

There is no concern about water coming in contact with the paint after the paint has dried. The paint isn't going to wash off when water comes in contact with it. Once the water has evaporated, additional water contact has no effect. This paint as marketed by System Three® Resins has been used for years on fiberglass boats that are constantly exposed to salt water, rain, ice, and direct sunlight. Also the paint is marketed to the home built full scale aircraft market.

80" Midwest Products Extra 300S painted with NELSON Hobby Paint. Less than 1 1/2 pints used. Built by Jerry Nelson

The paint is an one or two part product. As a one part paint, it can be used over solid surfaces and for use with low nitro fuel or gasoline. The Cross Linker additive is added in the amount of 8 drops per ounce. Use Cross Linker when painting over open fabric covered structures. The use of the Cross Linker is required when using 10% or higher nitro glow fuels and when fabric covering is used over open surfaces. Cross Linker is supplied in containers sufficient for 2 quarts. We highly recommend the use of Cross Linker regardless of the painting application. It simply makes the paint tougher and more scratch resistant.

Frank Kagel's 75 pound 45% scale Pitts S2 flown at the Top Gun R/C competition in Florida. It powered with a 4-cylinder 3W engine. Radio is a JR. Model covered with NELSON LiteFAB FAB and painted with NELSON Hobby True Red paint.

Standard military and standard film matching colors colors are supplied in pint and 1/2 pint plastic bottles with a screw cap. Custom colors are supplied in only pint container sizes.

NELSON Hobby Epoxy light gray primer is supplied in two plastic containers when totally mixed together will make one pint. The mixing ratio is 3-1. Primer is intended for use only over solid surfaces of fabric, plastic, aluminum, steel, or fiberglass. The majority of primers should not be used over open bay fabric surfaces. Primers are not generally flexible enough for open bay fabric and may crack when the fabric is flexed.

A collection of some R/C aircraft that used our paint.

A professional quality paint job is not a series of short cuts and rushed procedures. A professional quality paint job, with any kind of paint system, is quite simple. However, each step in the process has to be done and finished correctly. There is no way to make professional finish without any work. It takes time to do it right. However, the NELSON Hobby paint can produce a very acceptable finish rather quickly, perhaps with less labor than any other paint system. The quality of the final paint job is directly related to what’s under the paint and primer, and the weather and physical conditions that the painting process was done under.

ADVANTAGES OF NELSON

HOBBY PAINT

PAINT DOESN’T SMELL

Perhaps most modelers paint in their basement or an attached room to their home. Typical paint smell is dispersed throughout the house. Often the modeler doesn't notice the smell or odor, but others in the home may find paint smell annoying. This paint really doesn't smell at all.

LOW TOXICITY

Many paint users, especially older people, can have serious reactions to solvent based paints. Since the solvent in the NELSON Hobby paint is water, there is very little concern of any allergic reactions to the skin or internal parts of the human body.

GOOD COVERAGE

Paint has a high level of pigment and solids. The 80 inch wingspan Midwest Products Extra 300S shown in the photo was entirely covered with polyester fabric, except for the fiberglass parts. Less than 1 1/2 pints paint was used to paint the entire aircraft. We have received several reports of modelers painting a 1/4 scale Cub with less than 2 pints of our paint.

LOWER WEIGHT

Because the coverage is so good and the pigment levels are high, there is actually less paint put onto the model.

MODERATE COST

NELSON Hobby paints are of very high quality and feature a high amount of pigment. Coverage is excellent and there is no cost for the thinner making the actual cost of a paint job quite reasonable. Also there is no hazard shipping costs with this paint.

EASY CLEAN UP

Since water is used for cleaning up, one can use all the “thinner/water” for cleaning up the paint equipment and painting area.

QUICK DRYING

A painted object can be picked up and additional paint applied in less than 10 minutes. With a heat gun and carefully applying heat, the paint can be cured sufficiently to sand in less than 1 minute.

SPRAY OR BRUSH

Any common method of applying the paint can be used. An inexpensive foam rubber brush can be used with good results. Standard high pressure or low pressure HVLP spray equipment can also be used. Exceptional results are obtained with the HVLP equipment.

OVER-SPRAY FALLS AS DUST

Over-spray occurs when spraying. Over-spray in many paints will adhere to the area around the object being painted. This paint over-spray dries immediately and falls as dust (unless the backdrop area is immediately next to the object being painted).

The paint can be applied directly to polyester or epoxy parts without the need for a base primer. It can also be used on many different plastics. Some flat finish plastics, such as ABS, require a under coat of 3M Artist Spray Mount adhesive or our epoxy primer. Most shinny plastics and canopies can be painted directly.

The paint should not be used over butyrate dope or standard quick drying lacquer primer or simi liar quick drying primer. This applies to spray can type primers that are quick drying. Two part epoxy primers are recommend for best results. Be certain to read the toxicity instructions when using epoxy primers use for commercial purposes. The primer we offer is very low on toxicity.

One must test the adhesion of the paint before using on different types of primers and painted surfaces. Please call (not email) for more information on compatible primers or base coats.

CLEAR DOPE NOT NEEDED ON FABRIC

Clear doping of polyester fabrics commonly used on larger model aircraft need not be filled or primed with clear dope. The paint is applied directly onto the raw fabric. A lighter weight finish is the result of using this paint. Crosslinker required on open fabric surfaces.

FUEL PROOF

NELSON Hobby paint with the addition of the recommended Cross Linker additive (only 8 drops per ounce of paint) allows the use of  50% or more nitro fuels. The paint can be used without the Cross Linker, on solid surfaces, when gasoline or low nitro glow fuel is used.

SANDS EASILY

Can be easily wet sanded with 220 or 320 wet and dry sandpaper.

DOESN’T TURN YELLOW
An ultraviolet inhibitor is part of the paint chemistry. With age, the colored or clear paint does not have a tendency to turn yellow like many epoxy paints.

MANY COLORS AVAILABLE INCLUDING MILITARY FS 595B COLORS

A wide selection of colors that match very closely to popular Mylar/plastic films are available. Many common military colors are also available. Custom colors can be provided as well. Gloss and flat clear paint is also provided.

HAS A GLOSSY FINISH

Paint dries to a good gloss. Perhaps not a wet look, but depending on the colors, the gloss is highly reflective. Red being a high gloss color and white a lower gloss color. The application of a clear coat will provide a wet look gloss if required. Most modelers are satisfied with the natural gloss. A flat clear for military paint jobs is also available.

ALSO AVAILABLE  IN FLAT COLORS

All military colors are available in a non gloss or flat finish.

ADVANTAGES OF NELSON

HOBBY EPOXY PRIMER

SANDS WELL

This primer can be easily wet sanded.

ADHERES TO MOST SURFACES

Adheres excellently to fiberglass parts, aluminum, steel, most plastics, and wood.

LIGHT GREY IN COLOR

Excellent color base for lighter colors such as red, yellow, and orange.The light gray color makes it easier to see un sanded depressions in the surface.

WATER IS THINNER

Water is used for thinning and clean up. Isopropyl alcohol mixed 50-50 with water to straight alcohol can be used for spraying.

BRUSH OR SPRAY

Primer can be easily applied with a foam rubber brush or by spraying.

DOESN’T SHRINK

This type of primer doesn't shrink after curing. This means when primer is applied in several layers over imperfections and then sanded, depressions or hollow spots will not occur due to long term shrinkage over those imperfections. A stable smooth, level surface is obtained.

LOW TOXCITY

The primer is very low in toxicity.

ABOUT COLORS

The various NELSON Hobby colors are reproduced as accurately as possible. However, there are many variables that effect the actual color produced. This applies to our paints as well as to the various brands of plastic film covering materials. Be aware of color variances between the film color on the model and a part painted with our paint. Sometime the various film colors can be be off a lot between production batches.

The color of a painted surface depends on the actual surface itself and the final gloss obtained by the paint. A wet look high gloss finish will more approximate the color of a plastic film finish. Use our gloss clear to get a film finish. A flat clear is offered for use on military colors. Gloss and flat clear can be mixed to obtain a different look.

Another variable with a painted color is the color of the base or initial color. Yellow, orange, and red type colors painted over white paint look normal in color. However, if any of these colors are painted over a darker color, then the apparent final color will be of a different shade. The yellow, orange, and red colors are semi-transparent due to the make up of the pigments used. In today’s time, our government does not allow lead in paint pigments. In the past the red, yellow, and orange type colors used lead in the pigments to produce a very solid dense color.

Matching colors to a color photograph lead to accuracy problems. The colors of a photo have many variables such as the time of day photo was taken, distance of the camera from the aircraft, the color of the surface the aircraft is sitting on, the type of film used, and many variables in the processing of the film.

Many times in magazine photos you can find a series of photos about a particular aircraft and find that the colors are different in many of the photos.

World War I colors are difficult. There were no colored photographs at the time. The reference colors are from artists paintings and perhaps scraps of the original aircraft. Over many years these colors have faded.

It is not practical for us to print all of our standard colors. Shown is just a representative of what is offered.

ORDERING INFORMATION

CUSTOM COLORS

A limited number of custom colors are available. These are colors that we do not stock but we have mixing information available. These colors include Federal Standard colors (FS) that are not listed in our standard selection of USA Military FS colors and other German, British, and Japanese colors not listed.

We can also offer Randolph Products and Stitts aircraft paint colors. We have mixing information for most of these colors. These colors considered custom colors as we do not stock these colors. Available in pints at $24.95 and quarts at $47.95. We have color charts from these two companies, however there may be discontinued or new colors that we do not have on file.

PAINT NOW AVAILABLE IN QUART SIZES

We now have all our paints available in quart can sizes. There is a savings in ordering in quart sizes. Even though the quart can costs more than the plastic bottles, there still is a savings that can be passed on to our customers. We can mix the colors directly into the quart can and not have to transfer the paint into a smaller plastic bottle.

There will be a price increase effective June 1, 2009. We have not raised our prices for over a year now.  Because our raw material paint costs during the last year have gradually increased, we are at a point in time that we must now pass on these higher costs by raising our retail prices. Also our bottle, cap, and label prices have also increased and these price increases have to be reflected in our new retail prices.

We still offer our discount on paint purchases.

$50-$100 there is a 5% discount.

$100+ to $150 a 10% discount.

$150+ to $200 a 15% discount.

$200+ a  20% discount

NEW PRICES:

Gloss Clear, Flat Clear, and White

       1/2 Pints: $11.95   Pints: $21.95    Quarts: $39.95

Primer:

       Pint Kit only: $22.95

Civilian Colors:(Monokote. Ultracoat, ICS Commerical colors)

       1/2 Pints: $13.95  Quarts $44.95

Standard Military Colors:

        1/2 Pint Gloss: $13.95  Quarts $44.95

        1/2 Pint Flat: $14.95  Quarts $47.95

Custom Colors:

        Pints only: $24.95  Quarts: $47.95

NELSON Hobby Paint Products CLEAR, PRIMER & CROSSLINKER
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE
P1008	GLOSS CLEAR	1/2 pt.	$11.95
P10016	GLOSS CLEAR	1 pt.	$21.95
P10032	GLOSS CLEAR	Quart	$39.95
P1018	FLAT CLEAR	1/2 pt	$11.95
P10116	FLAT CLEAR	1 pt.	$21.95
P10132	FLAT CLEAR	Quart	$39.95
P07316	PRIMER GREY	Pint Kit	$22.95
P098	CROSSLINKER (for 2 quarts)	1 oz	$7.95

 

NOTE: The printed colors shown in the following lists of paint products are not always exact. Color differences will vary due to differences in computer monitors and software, printers, and the paper used if printed.

NELSON Hobby Paint Products MonoKote® FILM COLORS Monokote® is a registered trade mark of Great Planes Distributors (Quart Size is $44.95. Add -32 after first 3 numbers)
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
P2018	RED #201	1/2 pt.	$13.95
P2028	ORANGE #202	1/2 pt	$13.95
P2038	YELLOW #203	1/2 pt.	$13.95
P2048	WHITE #204	1/2 pt.	$13.95
P20432	WHITE #204	Quart	$39.95
P2068	SKY BLUE #206	1/2 pt.	$13.95
P2078	INSIGNIA BLUE #207	1/2 pt.	$13.95
P2088	BLACK #208	1/2 pt.	$13.95
P2108	OLIVE DRAB #210	1/2 pt.	$13.95
P2118	DOVE GREY #211	1/2 pt.	$13.95
P2128	CREAM #212	1/2 pt.	$13.95
P2138	MAROON #213	1/2 pt.	$13.95
P2148	FORREST GREEN #214	1/2 pt.	$13.95
P2158	PINK #215	1/2 pt.	$13.95
P2168	TAN #216	1/2 pt.	$13.95
P2178	BLUE MIST #217	1/2 pt.	$13.95
P2188	DARK RED #218	1/2 pt.	$13.95
P2208	CUB YELLOW #220	1/2 pt.	$13.95
P2218	ROYAL BLUE #221	1/2 pt.	$13.95
P2238	DARK TEAL #223	1/2 pt.	$13.95
P2248	LIGHT PURPLE #224	1/2 pt.	$13.95
P2258	MEDIUM PURPLE #225	1/2 pt.	$13.95
P2268	SAPPHIRE BLUE #226	1/2 pt.	$13.95
P2278	TRUE RED #227	1/2 pt.	$13.95

 

NELSON Hobby Paint Products Ultracote® FILM COLORS Ultracote® is a registered trade mark of Horizon Hobby Inc. (Quart Size is $44.95. Add -32 after first 3 numbers)
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
P8668	TRUE RED #866	1/2 pt	$13.95
P8678	DEEP PINK #867	1/2 pt.	$13.95
P8708	WHITE #870	1/2 pt.	$13.95
P87032	WHITE #870	Quart	$39.95
P8718	DEEP RED #871	1/2 pt.	$13.95
P8728	YELLOW #872	1/2 pt.	$13.95
P8738	DEEP BLUE #873	1/2 pt.	$13.95
P8748	BLACK #874	1/2 pt.	$13.95
P8758	SKY BLUE #875	1/2 pt.	$13.95
P8768	COCOA #876	1/2 pt.	$13.95
P8788	CREAM #878	1/2 pt.	$13.95
P8808	GREEN #880	1/2 pt.	$13.95
P8828	LIGHT GREY #882	1/2 pt.	$13.95
P8838	FLAME RED #883	1/2 pt.	$13.95
P8848	CUB YELLOW #884	1/2 pt.	$13.95
P8858	MIDNIGHT BLUE #885	1/2 pt.	$13.95
P8888	LIME GREEN #888	1/2 pt.	$13.95
P8898	DARK YELLOW #889	1/2 pt.	$13.95
P8988	TURQUOISE #898	1/2 pt.	$13.95
P9048	OLIVE DRAB #904	1/2 pt.	$13.95
P9058	CORSAIR BLUE #905	1/2 pt.	$13.95
P2268	SAPPHIRE BLUE #226	1/2 pt.	$13.95

 

NELSON Hobby Paint Products US MILITARY FS COLORS All colors available in a flat finish. Add F to end of part number to identify a flat finish. Example Glossy Sea Blue is FS15042-8. Flat version is FS15042-8F. (Add $1 for 1/2 Pint Flat Colors) (Quart Size is $44.95. Add -32 instead of -8)
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
FS15042-8	GLOSSY SEA BLUE #15042	1/2 pt.	$13.95
FS16081-8	ENGINE GREY #16081	1/2 pt	$13.95
FS30313-8	SAND #30313	1/2 pt.	$13.95
FS31136-8	BRIGHT RED #31136	1/2 pt.	$13.95
FS33538-8	IDENTIFICATION YELLOW #33538	1/2 pt.	$13.95
FS33070M-8	OLIVE DRAB #41 #33070 (modified)	1/2 pt.	$13.95
FS34052-8	MEDIUM GREEN #34052	1 pt.	$13.95
FS35042-8	NON-SPECULAR SEA BLUE #35042	1/2 pt.	$13.95
FS35044-8	INSIGNIA BLUE #35044	1/2 pt.	$13.95
FS35164-8	INTERMEDIATE BLUE #35164	1/2 pt.	$13.95
FS35231-8	AZURE BLUE #35231	1/2 pt.	$13.95
FS36173-8	NEUTRAL GREY #36173	1/2 pt.	$13.95
FS36118-8	BLUE GREY #36118	1/2 pt.	$13.95
FS36720-8	DARK GULL GREY #36720	1/2 pt.	$13.95
FS36463-8	LIGHT GULL GREY #36463	1/2 pt.	$13.95

 

NELSON Hobby Paint Products GERMAN WWII COLORS All colors available in a flat finish. Add F to end of part number to identify a flat finish. Example Gray is GL359M-8. Flat version is GL359M-8F. (Add $1 for 1/2 Pint Flat Colors) (Quart Size is $44.95. Add -32 instead of -8)
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
GL359M-8	GREY #RLM 02	1/2 pt.	$13.95
GL13655-8	YELLOW #RLM 04	1/2 pt	$13.95
GL311-8	RED #RLM 23	1/2 pt.	$13.95
GL35052M-8	BLUE #RLM 24	1/2 pt.	$13.95
GL14159-8	GREEN GREY #RLM 63	1/2 pt.	$13.95
GL35352-8	LIGHT BLUE #RLM 65	1/2 pt.	$13.95
GL14052-8	BLACK GREEN #RLM 70	1/2 pt.	$13.95
GL34084-8	DARK GREEN #RLM 71	1/2 pt.	$13.95
GL26081-8	GREY #RLM 74	1/2 pt.	$13.95
GL38152-8	VIOLET GREY #RLM 75	1/2 pt.	$13.95
GL36473-8	GREY #RLM 76	1/2 pt.	$13.95
GL33245-8	SAND #RLM 79	1/2 pt.	$13.95

 

NELSON Hobby Paint Products BRITISH WWII COLORS All colors available in a flat finish. Add F to end of part number to identify a flat finish. Example Dark Earth is RAF20095-8. Flat version is RAF20095-8F. (Add $1 for 1/2 Pint Flat Colors) (Quart Size is $44.95. Add -32 instead of -8)
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
RAF20095-8	DARK EARTH	1/2 pt.	$13.95
RAF24583-8	SKY	1/2 pt	$13.95
RAF358M-8	INTERIOR GREEN (Zinc Chromate Color)	1/2 pt.	$13.95
RAF24079-8	DARK GREEN	1/2 pt.	$13.95
RAF35177M-8	P.R.U. BLUE	1/2 pt.	$13.95
RAF35045-8	ROUNDEL BLUE	1/2 pt.	$13.95
RAF36320-8	MEDIUM SEA GREY	1/2 pt.	$13.95
RAF36173-8	DARK SEA GREY	1/2 pt.	$13.95
RAF16008-8	EXTRA DARK SEA GREY	1/2 pt.	$13.95
RAF36173-8	OCEAN GREY	1/2 pt.	$13.95
RAF33538-8	TRAINER YELLOW	1/2 pt.	$13.95
RAF30160M-8	ROUNDEL RED	1/2 pt.	$13.95

 

NELSON Hobby Paint Products JAPANESE WWII COLORS All colors available in a flat finish. Add F to end of part number to identify a flat finish. Example is Green JAP34102-8. Flat version is JAP34102-8F. (Add $1 for 1/2 Pint Flat Colors) (Quart Size is $44.95. Add -32 instead of -8)
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
JAP34102-8	GREEN #A-3	1/2 pt.	$13.95
JAP34058-8	GREEN #N-1	1/2 pt	$13.95
JAP35042-8	BLUE BLACK	1/2 pt.	$13.95
JAP36495-8	GREY #A/N-2	1/2 pt.	$13.95
JAP36595-8	GREY #A-5	1/2 pt.	$13.95
JAP35526-8	GREY #N-8	1/2 pt.	$13.95
JAP30111-8	RED #A/N-16	1/2 pt.	$13.95
JAP21105-8	RED #A/N-16 RED (New)	1/2 pt.	$13.95
JAP30111-8	BROWN #A/N-14	1/2 pt.	$13.95
JAP13432-8	YELLOW #A//N-20	1/2 pt.	$13.95

 

NELSON Hobby Paint Products SPECIAL COLORS
ITEM NO.	DESCRIPTION	QTY. PKG.	PRICE	COLOR
	ZINC CHROMATE COLOR (YELLOW GREEN)	1/2 pt	$12.95
	ZINC CHROMATE COLOR (GREEN)	1/2 pt.	$12.95
P100	COMMERICAL COLOR CHART. Has 190 colors. Colors are not identified as aircraft colors.		$5.00

Revised 6/1//09